===== Mitel DNIC =====

This document provides information on integrating a Mitel SX200 Digital PABX or Mitel SX200 Light PABX with a DuVoice voicemail DNIC Voice Mail using Dialogic D82JCT-U cards.

==== Switch Programming ==== 


Set the voice mail extension types to 430. NOTE: If upgrading to MX, 430 support requires a license. 

Enable the following COS Options in the COS of the extensions that will have voice mail(Form 03).

Follow Mitel manual Express Messenger to setup DuVoice ports. 

  * Unordered List ItemCOS Option 206 (Call Forwarding – Busy).
  * COS Option 207 (Call Forwarding – Don’t Answer).
  * COS Option 208 (Call Forwarding – External).
  * COS Option 232 (Message Waiting Setup: Lamp).
  * COS Option 245 (Abbreviated Dialing Access).



==== Other ====

  * Place all DNIC voice mail extensions in the same hunt group in Form 17 (HuntGroups), and assign an access code to the group.
  * Assign an access code to feature 41 (Send Message), so that the Duvoice voicemail will be able to turn on message waiting on a telephone extension.
  * Enable System Option 22 (Last Party Clear: Dial Tone), so that dial tone will be provided on a hang up to release the voice mail port.

==== DuVoice Programming ====

== Dialogic DCM ==

  - In the DCM configuration select the Mitel 430 as the PBX.
  - TSF File Support= Yes
  - Disconnect Tone=Yes
  - Under files load the Mitel-ONS.tsf found in the C:\VS\tonefiles folder.

== DV2000 ==

  - Set DuVoice port integration to 'MITEL DNIC JCT'
  - Set Message Lights to match Mitel codes (FEA 41 in Mitel) (If unknown, try: *411N = on, *412N = off)