====== SIEMENS ======

The DuVoice 7.00 can connect to a SIEMENS OpenScape PBX using TCP/IP.  This link uses the protocol and features listed in the table below:

|< 80% 15% 20% 20% >|
^Link Type^Protocol Used^Log File Prefix^Features Supported^
|//TCP Client//|//SIEMENS SOAP interface//|SIEMENS|Name Change, Set user rights group (phone COS), DND|

This page is used to configure the 7.00's link to a SIEMENS OpenScape PBX.

{{:images:vs7:manual:pbxlink-siemens.png?nolink|}}

The settings are grouped into two categories:  //Network// and //Scheduling//.  Configure the settings as needed and then click **OK** to save your changes and close the dialog.  Or click **Cancel** to discard any changes and close the dialog.

===== Network Settings =====

|< 85% 20% 15% >|
^Setting^Default^Description^
|//IP or DNS Name//|(blank)|Enter the IP address or domain name of the PBX.|
|//TCP Port number//|8767|Enter the port number used to establish a connection with the SIEMENS PBX.  The default for this PBX is **8767**.|

===== Scheduling =====

|< 85% 20% 15% >|
^Setting^Default^Description^
|//Retries//|3|Enter the number of times to retry after an attempt to send a change request fails.\\ \\ //If all attempts fail, the request will be discarded.//|