====== UNIVERGE 3C ======

The DuVoice 7.00 can connect to an NEC UNIVERGE 3C PBX using TCP/IP.  This link uses the protocol and features listed in the table below:

|< 80% 15% 20% 20% >|
^Link Type^Protocol Used^Log File Prefix^Features Supported^
|//TCP Client//|//NEC SOAP interface//|UNIVERGE|Name Change, Set user rights group (phone COS), DND|

This page is used to configure the 7.00's link to an NEC UNIVERGE 3C PBX.

{{:images:vs7:manual:pbxlink-univerge.png?nolink|}}

Configure the settings as needed and then click **OK** to save your changes and close the dialog.  Or click **Cancel** to discard any changes and close the dialog.

===== Network Settings =====

|< 85% 20% 15% >|
^Setting^Default^Description^
|//IP or DNS Name//|(blank)|Enter the IP address or server name of the PBX.|
|//Username//|(blank)|Enter the user name required to login to the PBX.\\ \\ //For security reasons, the user name must be preceded by the domain.  For example, if the account user name is //''spheresupport''// and the domain is //''necshow''//, then enter //''necshow/spheresupport''// in the //Username// field.//|
|//Password//|(blank)|Enter the password required to login to the PBX.|