~~NOTOC~~
====== MWI / DMG Routing ======

The MWI / DMG Routing page is used to configure the routing of MWI notifications and wakeup calls through specified DMG (Dialogic Media Gateway) ports on a per-line basis.  If you are not using DMGs, then you can skip this page.

{{:images:vs7:manual:sip-routing.png?nolink|}}

To save your changes, click **OK**.  To discard them, click **Cancel**.

|< 85% 20% >|
^Setting^Description^
|//Line//|Line number.  Automatically set when the line was created.  **Read-only.**|
|//IP Address//|Enter the alternate IP address to which all wakeup calls and MWI notifications for this line should be directed.\\ \\ **__Note__:** //If you are using only one DMG, this is optional.  **If you are using multiple gateways, it is required.**//|
|//DMG MWI Port//|When the 7.00 performs MWI notification, it will send it direct the DMG to use the selected port.\\ \\ <WRAP indent>  * If you select //Any//, the choice of port will be made by the DMG itself, based on its configuration.\\  * If you select //Same//, the system will select the DMG port that maps to the voice line on which the notification is occurring.\\  * If you select one of the numbers from 1 to 8, the DMG will be directed to use the specified port.</WRAP>|