====== Martec Interface Tester ====== Used to test Martec configurations. {{:images:vs7:manual:utils:msi1.png?nolink|}} ^ Field / Button ^ Description ^ | //Configure (Packet)// | Configure the packets you wish to send. | | //Configure (COM)// | Configure the COM settings. | | //Send Now// | Send out packets according to the configuration. | | //Clear// | Clear the Serial I/O log. | ===== Packet Configuration ===== {{:images:vs7:manual:utils:msi2.png?nolink|}} ^ Field / Button ^ Description ^ | //Load List// | Populates the select room list. | | //Select All// | Selects every room in list. | | //Range Start// | Choose a room to be the start of the range you wish to pick. | | //Count// | The number of rooms specified after the Range Start room. | | //Included in Packet:// | How each room number is included in the packet. | ===== COM Configuration ===== {{:images:vs7:manual:utils:msi3.png?nolink|}} ^ Field / Button ^ Description ^ | //Port// | Pick which COM port you wish to send packets on. | | //Baud Rate// | Number of bits sent per second. | | //Data Bits// | Number of data bits in each packet. | | //Stop Bits// | Number of stop bits used at the end of each packet. | | //Parity// | Style of parity bits for error detection. |