{{indexmenu_n>10}}
~~Title: 2) Dialogic HMP~~~
====== Dialogic HMP (SIP) ======
Dialogic PowerMedia (HMP) is the SIP stack provider used by DuVoice.  This software may be downloaded for free from the Dialogic web site.

===== Requirements =====
  * Dialogic HMP license file.
  * High Precision Event Timer (HPET) support.

===== New Install =====
Once downloaded on the local machine the install **must** be run as administrator. Right click on the icon and choose //Run as administrator.// Not doing this will prevent the software from being installed.

<WRAP center round important 100%>
If re-installing Dialogic to a newer version, it is **important** to configure the DV2000 to not auto-start until the process has been completed.
</WRAP>


==== Runtime ====
The first screen may encounter is be a requirement to install the Microsoft runtime. If this dialog is shown, click //Install//.

{{:images:vs8:install:dialogic-01-dlls.png|?direct}}

==== Drivers ====
{{:images:vs8:install:dialogic-02-welcome.png|?direct}}

This page is informational only. Click **Next** to continue.

{{:images:vs8:install:dialogic-03-folder1.png|?direct}}

Click **Next** to accept the default install folder for program files.

{{:images:vs8:install:dialogic-04-folder2.png|?direct}}

Click **Next** to accept the default install folder for data files.

{{:images:vs8:install:dialogic-05-features.png|?direct}}

Check the //Core Runtime Package// option and then click **Next** to continue.

{{:images:vs8:install:dialogic-06-3rdparty.png|?direct}}

This page prompts you to accept the installation of some 3rd-party software that the Dialogic software depends on. Click **Yes** to continue.

{{:images:vs8:install:dialogic-07-progfolder.png|?direct}}

Click **Next** to accept the default program folder.

{{:images:vs8:install:dialogic-08-copy.png|?direct}}

This page reviews the selections you have made in the previous pages. Click **Next** to continue.

{{:images:vs8:install:dialogic-09-reboot.png|?direct}}

The computer must be rebooted after the installer is finished, so select **Yes, I want to restart my computer now** and then click **Finish**. The wizard will close and the computer will be rebooted.

===== Configuration =====
Dialogic configuration is a two step process. First a license must be applied so the driver can correctly start the number of voice channels, the second is to configure the virtual board for the network adapter.

==== License ====
A Dialogic license is locked to a MAC address located on the system and cannot be moved between machines.

From the Windows //Start// menu choose //HMP License Manager// under the Dialogic HMP folder.

{{:images:vs8:install:dialogic-11-license1.png|?direct}}

  - Click **Browse..**
  - Browse to your license file. This file will have your MAC address as part of the filename and the //.lic// extension. It can be located anywhere on the system. This file should be retained in case of any hardware failures. \\ **Note:** The Dialogic license file is automatically added to the DV2000 backups. It will be placed into the DV2000 data folder, typically **c:\vs** when restored.
  - Once chosen the click **Activate License**.

{{:images:vs8:install:dialogic-12-license2.png|?direct}}

Click **OK**.

==== Dialogic Configuration Manager (DCM) ====
From the Windows //Start// menu choose //Configuration Manager - DCM// under the Dialogic HMP folder.

{{:images:vs8:install:dialogic-13-dcm1.png|?direct}}

Right-click on //HMP_Software #0 in slot 0 / 65535//.

{{:images:vs8:install:dialogic-14-dcm2.png|?direct}}

Select //Restore device defaults//.

{{:images:vs8:install:dialogic-15-dcm3.png|?direct}}

You will be prompted to confirm the choice to restore defaults; Click **Yes**.

{{:images:vs8:install:dialogic-16-dcm4.png|?direct}}

Select the license file that you activated in the previous step from the //Available Firmware// list. Note that both demo license and the active license will be displayed, make sure not to select the //1r1// demo license. Then click **OK**.

==== Adapter ====
The board must not be bound to the network adapter which will be used to communicate with the PBX. This does not need to be the same one which was used to license the Dialogic software.

{{:images:vs8:install:dialogic-13-dcm1.png|?direct}}

Double click on //HMP_Software #0 in slot 0 / 65535//.

{{:images:vs8:install:dialogic-18-dcm6.png|?direct}}

Your system may show one or more Ethernet adapters and their associated MAC address. The MAC address in this image has been hidden. 

Choose the IPV4 address associated with the adapter of your choice. Dialogic will default to use an IPV6 address, however his is incompatible with the DV2000 so only IPV4 may be chosen.

Click **OK**.

==== Startup ====
In this next step you must configure the driver to start when the system reboots.

{{:images:vs8:install:dialogic-17-dcm5.png|?direct}}

From the //Settings// menu choose //System/Device autostart > Start System//.

{{:images:vs8:install:dialogic-13-dcm1.png|?direct}}

Click the green arrow in the toolbar to start the drivers. This may take a few minutes and will verify the configuration and license are correct.