MWI / DMG Routing
The MWI / DMG Routing page is used to configure the routing of MWI notifications and wakeup calls through specified DMG (Dialogic Media Gateway) ports on a per-line basis. If you are not using DMGs, then you can skip this page.
To save your changes, click OK. To discard them, click Cancel.
| Setting | Description |
|---|---|
| Line | Line number. Automatically set when the line was created. Read-only. |
| IP Address | Enter the alternate IP address to which all wakeup calls and MWI notifications for this line should be directed. Note: If you are using only one DMG, this is optional. If you are using multiple gateways, it is required. |
| DMG MWI Port | When the 7.00 performs MWI notification, it will send it direct the DMG to use the selected port.
* If you select Any, the choice of port will be made by the DMG itself, based on its configuration. |