Martec Interface Tester
Used to test Martec configurations.
Field / Button | Description |
---|---|
Configure (Packet) | Configure the packets you wish to send. |
Configure (COM) | Configure the COM settings. |
Send Now | Send out packets according to the configuration. |
Clear | Clear the Serial I/O log. |
Packet Configuration
Field / Button | Description |
---|---|
Load List | Populates the select room list. |
Select All | Selects every room in list. |
Range Start | Choose a room to be the start of the range you wish to pick. |
Count | The number of rooms specified after the Range Start room. |
Included in Packet: | How each room number is included in the packet. |
COM Configuration
Field / Button | Description |
---|---|
Port | Pick which COM port you wish to send packets on. |
Baud Rate | Number of bits sent per second. |
Data Bits | Number of data bits in each packet. |
Stop Bits | Number of stop bits used at the end of each packet. |
Parity | Style of parity bits for error detection. |